Setup
1. Download Open Broadcaster Software (OBS) from the official website. 2. Open the Settings section and go to the Stream tab. Complete the remaining steps in it.

- rtmp://vp-push-ix1.gvideo.co/in/ is the Server.
- 400448?cdf2a7ccf990e464c2b… is the Stream Key.


Configure the stream parameters for optimal performance
We recommend configuring the stream parameters you will send to our server to ensure optimal streaming performance. You can adjust these settings in the OBS Output, Audio, and Video tabs.Output parameters
1. Open OBS Settings and go to the Output tab. Select Simple mode. 2. Set the parameters as follows:- Video Bitrate: The resolution of your stream determines the required bitrate: The higher the resolution, the higher the bitrate. To stream at 720p resolution, set the bitrate to 2000Kbps. If you’re broadcasting at 1080p, set the bitrate to 4000Kbps.
- Audio Bitrate: 128.
- Encoder: Software (x264), or any other H264 codec.

- Rate control: CRF (the default value is 23)
- Keyframe Interval (0=auto): 2s
- CPU Usage Preset: veryfast
- Profile: baseline

Audio parameters

Video parameters
If you need to reduce the original resolution (downscale), follow the instructions in this section. If no resolution change is required, you can skip this step. 1. Open OBS Settings and go to the Video tab. 2. Set the following parameters:- Output (Scaled) Resolution: 1280×720
- Downscale Filter: Bicubic
- Common FPS Values: 30

You can see the stream’s output parameters here. If you need to increase the FPS to 60, make sure to also increase the bitrate accordingly for optimal stream quality.