APISign in
The Gcore Customer Portal is being updated. Screenshots may not show the current version.
Hosting
Hosting
Overview
Test network performance
OrderUpgrade
Log in to DCImanagerLog in to IPMI
Windows serverLinux serverSSH keyChange port for SSH connections
Install a Linux OS from your ISO imageInstall Linux from a template
BuyConfigure
VLAN10 Gbps network card
PTR recordReboot
Check statisticsDelete
Suspended serverServer that is not responding to ping requestsIP address is in the blacklistsISO imagesIPMIIncorrect IP locationSSH connectionPacket loss or high ping
Overview
Choose a configurationTest network performance
OrderUpgrade
VMmanager 6
Windows server
Connect to a Linux server via Control panelSSH connectionManage SSH keysChange port for SSH connections
VNC
GUI (desktop environment)
Buy a Windows serverInstall Linux from a templateInstall Linux from your ISO imageInstall an OS from a template in VMmanager 6Install an OS from ISO in VMmanager 6
IPv6 in VMmanager 6
BuyConfigure
PTR record
Delete
Suspended serverServer is not responding to ping requestsIP address is in the blacklistsISO imageSMTP portsIncorrect IP locationSSH connectionPacket loss or high ping
OverviewActivate
Configure Managed DNS
OverviewActivate
Activate BGP
Activate Link Aggregation
NotificationsPasswordTwo-factor authentication
Add a userUser rights
Authorization history
Pay for Gcore servicesRenew your serverAuto paymentTroubleshoot payment errorsPayment historyRefund
Technical supportAPIBecome a resellerReferral program
APISign in
Chosen image
Home/Hosting/Dedicated Servers/Manage/Operating system/Install a Linux OS from your ISO image

Install a Linux OS from your ISO image

You can install almost any other OS on your DS for free. An exception is Windows, it could be purchased at the time of ordering server only and can not be installed later.

Click "Dedicated servers" at the main dashboard, choose your server and click "To Panel".

At the DCI manager, find ISO-images tab and click Upload.

ISO-images tab

Then go to the console in the IPMI and choose Virtual Storage tab.

Virtual Storage tab

Choose ISO file in the Logical Drive type, click Open to go to the ISO directory. You'll find there the uploaded ISO.

ISO

Choose the ISO you need and then click Open.

Choose the ISO

Then click Plug in and OK to finish the procedure.

Plug in

Reboot your server to start the Installation via ISO.

Was this article helpful?

Not a Gcore user yet?

Enhance your online presence with our virtual and dedicated servers.

Go to the product page
Edit on GitHub